Blog 5 (prompt 7)

         I sort of touched on this in the previous blog post, but I didn't understand how much I would come to enjoy digital art. The most difficult part was honestly just learning the software, but after that, I became pretty comfortable drawing digitally. I think part of the reason that I liked traditional art so much before was because it wasn't difficult to figure out, and it wasn't something that I had to learn, it was mainly intuition. Digital art was intimidating to me for a very long time because I am not the best with technology, but I know that if I want to get into a design career for graphic or video game design, then I need to learn how to navigate digital spaces.

    First of all, digital and traditional art are VERY different, and both have positive aspects to them. Digital art only requires that you have a device to draw on, and software to draw with, meanwhile traditional art requires physical materials that are an ongoing expense, but the tangibility of traditional art makes the finished product feel more liberating. However, I think the main thing that appealed to me about digital art was the quality of life you had when it came to editing your art. With traditional, you have to physically erase or paint over mistakes, but with digital you can literally just change the sizes of things, change colors, and separate parts into layers (layers are so nice to use).

    I really wanted to expand on my experience learning digital art because it felt monumental towards any artistic careers I might pursue in the future. Traditional art might be the thing I am best at, and it certainly got me into college, but digital is what I want to do as a career. 

Comments

  1. Rachel MullenMay 24, 2023 at 4:23 PM

    Libra, thank you for sharing your drawings in your blog post. I'm glad that you've had the opportunity to explore the world of digital art, and that you have been open to changing your approach and technique. I imagine that it must be liberating (in a way) to make the changes in a digital format...it seems much easier since your drawings are separated into layers. I also agree with you that starting a project and getting your ideas down on paper are the most difficult parts. It looks like you were able to doodle until you found something you liked. Keep up the great work blogging! -Mrs. Mullen

    ReplyDelete

Post a Comment

Popular posts from this blog

Blog 2 (prompt 8)

 The first thing that we learned during this project was printing and the steps that went into it. We used a stencil with different designs burned onto it to print greeting cards, cup sleeves, and notebooks. The process for printing is first deciding which color paper to use and which color ink to go with it. Next we taped off other sections of our stencil to prevent bleeding from other designs we aren't printing, and locked it into the printing press. Then we put a piece of paper under the stencil, put ink on top, and used a squeegee to pull the ink across the paper. After we take the paper out of the press, we determine if we will use it or throw it out. Misprints can happen if ink dries in the stencil, the stencil burned wrong, or if you just did not do the pull correctly which is typically what happens. Sometimes while printing, I would forget to put a paper under the press first entirely and end up just printing onto the table, but when we have our finished prints, we let them...
Read more

Blog 7

Image
  For the finished product of our project, the main thing we printed on was mugs. Screen printing can only print in one color, so it was too limiting for the designs that we had in mind. However, printing on mugs was probably one of the more flexible mediums. The process for printing on mugs is actually pretty simple, we print out our designs on a special type of paper, we tape that paper to the mug, so the ink is facing the ceramic, and then we heat press the entire mug so the ink transfers onto it. This sounds easy in theory, but it is actually very frustrating to get correct. One of the issues we encountered – and we did not expect this to be an issue, was the printing paper itself. When we printed some designs, some of them got cut off, so we had to throw out any designs that didn’t get fully printed. The other hard part is making sure that you tape the design onto the mug so it’s parallel and exactly where you want it to be. This can be difficult because you’re not even lookin...
Read more

Blog 6

  One of the most crucial steps in screen printing is burning the screen itself. Without having a stencil to print on, you literally cannot print anything. However, this is one of the most finicky parts of the process, and a lot can get messed up and it takes time to get right.  The first step is to make sure that you have an empty screen with no designs on it. Empty screens are kept in a drawer, but you can always power wash the designs off of an existing screen to have a blank one. The most important step of this process is to make sure that after you take a screen out of the drawer, or after it dries from being power washed, that the screen is not exposed to any light whatsoever. This is important because if a blank screen is exposed to light, anywhere the light touches will burn the screen, creating a purple layer. However, this is also how we burn designs into the stencil itself. In our mentor’s studio, he has a machine that creates a vacuum seal around the screen and use...
Read more